Wooden Shoe Bench – A shoe bank is a useful piece of furniture for an entrance or mudroom to help maintain order and organization. The bench offers a place to sit and tie shoes, as well as a storage area for boots and additional pairs of sneakers. As anyone with children can attest. The daily search for shoes that you can put on delay right at the first moment. So speed up your entrance and Corral those shoes with a storage bench that keeps everything together and out of the way. Cut three sections of the 1-by-10 plate to make the two sides and bottom shelf.
Measure and mark two lengths wooden shoe bench of 16 inches and a length of 24 inches. Use a ruler to make a line on each mark across the board as a guide for the circular saw. Cut a half-circle from one wooden end of the two side pieces to form the curved base. Place the flat side wooden, and place them end to end bench. Center the coffee can at the meeting point of the two ends half of the can on one side piece and the other half on the other. Measure 1 1/2 inches from each side edge of the plates and mark with the pencil. Align the can with the marks on each side bench and trace around the can.
15 Picture Gallery: Wooden Shoe Bench Useful Furniture
Cut the material semicircles with a saber saw, and sand the plank with 120 grit sandpaper. Measure and mark three wooden shoe bench 20 1/2-inch lengths on the 1-by-4 board. Use the ruler to extend the mark across the board, and cut the pieces with the circular saw. These pieces are the apron, the fixing system and the base of the bed frame. Place the block and the apron between the two side pieces. Place the wooden one side on its side edge and align one end of the base. So that it is flush with the top of the material. Cut the step of the 24-inch ladder and place it face down in your workspace.
This post topic: Uncategorized