Attach the door handle to each door, so that when the doors are hung handles will be on opposite sides. Attaching the rolls that came with the door track set to the beginning of the basement closet doors. Specify a roll in place about 21/2 inches from each corner of the top of plywood, mark the screw holes, drill holes and twist rollers in place.Basement closet doors glass,
Assess the distance from the lip of the door groove at the floor and subtract 1/2 inch. Add an inch to the width of the opening that is crawlspace. Cut a piece of plywood to these dimensions and then cut the piece of plywood in half to make two doors. Sand the cut edges of the plywood smooth and then paint or stain the basement closet doors.
Basement closet doors – Installing sliding doors to hide the interior of the basement crawl add a more finished look to the room and insulate the room from cold or warm air that can enter the house through the closet. Bypass doors hang on rollers that slides along a metal track. Stunning doors allow them to slide independently along the track. Assess the width of the opening that is crawlspace and use a hacksaw to cut the door track to the correct width. Drill holes and screw the track into place, using the screws provided with the kit.basement closet doors, how to make cliset in basement