How To Keep Dresser With Lock In Good Condition
When you have two pieces of metal (for example, a key and a lock ) fighting each other day by day, they finally end up sticking the rust and other dirt that makes them completely frozen. You have to know that there are many different types of dresser with lock and hooks, but not all are arranged the same. As with all home repairs, the best cure for this problem is prevention. The professionals of Cerrajero-cerrajero.com.es are the first thing they say to their clients. Make it part of your annual or semi-annual maintenance program and lubricate your locks and bolts.
There are a lot of lubricants that can be used for these projects, but we have to admit that none with which we have tried works is easier to apply than graphite powder, which you probably have already heard about and with which you can keep your locks in good condition and well oiled. The pencil mine, in the absence of graphite powder, it is also a good option when it comes to fixing this type of everyday situations in which we find ourselves in the cases we have mentioned.
Sticky dresser with lock? For a lock (or latch) sticky, the solution more quickly is to spray graphite powder find hardware or anywhere else task DIY and home and so, grab it and throw it directly into the keyhole; then insert the key and turn the keys several times in the lock. You can try the coating of the key with a thin layer of graphite, as we have already mentioned (rub the pencil over the entire key surface before inserting the key into the lock). If you have a safety lock, cover it lightly with lubricant or graphite as well. If the blockage is old, you may have to dismount first.
Loosen the screws of a button to free both sides of the shaft and pull them from the door. If you have a safety lock, first loosen the locking front, and then the knobs or handles. Keep the anchors to separate the different parts to reassemble easier. If your bolt has a drum assembly inside your door, look to see if it has a small hexagonal locking screw. Remove the hitch screws and faceplates for the locking mechanism along the inside edge of the door. It is also very important, in fact, quite important, that you grease all the moving parts of the lock and latch, which will move as you lightly cover with liquid graphite, engine oil, silicone or other lubricant. It also lubricates the key and moves back and forth in the lock several times. Reinstall and enjoy.
On the other hand, if the latch of your home or home does not close properly or remain closed, you can fix it in different ways, depending on what is wrong. If the latch is too large for the percussion plate (the piece with the hole in it, the “feminine” part of the dresser with lock), simply remove the plate, stabilize it by a vise or some other method, and enlarge the Opening with a metal file. Choose the inner edges that appear chewed by the latch hitting it repeatedly.